Immagine Sezione
NEWS
Quads31-03-2017    HANNOVER MESSE 2017!

And here we go again!

The world'€™s most important technology show is a powerful driver of investment in new technology and automation. Global megatrends such as dwindling resources, sustainability, mobility and urbanization are forcing industry to embrace change and invest for the future.

We will be very happy to receive you at our stand A11, Hall 23 from April 24th to 28th!

Quads07-03-2017    OMC 2017!

We are glad to inform you that Rotork Instruments Italy srl will participate to the Offshore Mediterranean Conference & Exhibition that will be held on from March 29th to March 31st, 2017 at Ravenna, Italy.

We will be very happy to receive you at our stand E10, Hall 1!

For more information regarding this event, please download the brochure! See you there!
download pdf download pdf
Quads07-03-2017    ROTORK INSTRUMENTS ITALY SRL!
Recently Soldo Controls and M&M International, went through a merge, creating a new entity into the Instrumentation market:
Rotork Instruments Italy is now the instrumentation one stop shop you were looking at.
Our commercial network includes sales offices in Europe, North America, Latin America, India, China and Singapore thus providing local support to manage all of our customers' needs.
Rotork Instruments Italy headquarters in Orio al Serio is also the R&D centre supporting our Sales Network with the design of new products that match and anticipate the market needs. A well-equipped internal R&D laboratory is available for performing the validation and testing of new products guaranteeing that they comply with the highest technical standards and Industry approvals.
At Rotork Instruments Italy we understand how much our products influence the ability of end users to control their processes and our quality systems guarantee that our products are 100% inspected before shipment.
We are passionate about our products and our Company and we believe this is the key driver for succeeding in serving our customers with the technical solutions they are looking for.
Quads12-10-2015    Solenoid valves boost Rotork Instruments product portfolio
The acquisition of M&M International Srl (M&M), a subsidiary of Spirax-Sarco Engineering plc, adds a complete range of solenoid valve products to the Rotork Instruments division.

Established for over 30 years, M&M is a leading manufacturer of general purpose solenoid valves, air actuated piston valves, automatic drain valves, connectors, coils and customised instrumentation solutions used throughout the commercial and industrial flow control industries.

From its base at Bergamo, Italy, M&M will complement the instrumentation products and services provided by Rotork Midland and provide a focal point for solenoid valve and piston actuated valve manufacturing in the Rotork Group. The acquisition supports Rotork's strategy of broadening its flow control product portfolio and expanding addressable markets.
Quads03-03-2015    HANNOVER MESSE 2015

The world’s most important technology show is a powerful driver of investment in new technology and automation. Global megatrends such as dwindling resources, sustainability, mobility and urbanization are forcing industry to embrace change and invest for the future. In 2013 our line-up of 11 leading trade fairs will focus on recent developments in each of the featured sectors.

We will be very happy to receive you at our stand  A12,  Hall 23 from April 13th to 17th!

Quads02-07-2014    Latching solenoid valves

M&M International is pleased to announce the release of an additional version of solenoid valve which can work w/o continuous power supply. The latching configuration depends on a special operator with built-in magnet, able to work with coils at a max. power of 3 Watts since it requires a momentary pulse to energize and de-energize.

 

The special operator and the 3W coil options can be fitted to valve series B297 (direct acting)  and to valve series B203-204-205  (pilot operated).

 

The max. OPD for pilot operated valves is 6 barg, it varies according to the orifice size for the direct acting versions.

 

The latching solenoid valves offer the following competitive advantages:

 

 - It has a very low power consumption

 

- It can be used with disposable power sources (batteries)

 

- It is recommendable in applications where the heating of the coil needs to be limited

 

The orders can be placed starting July 2014 and the average lead time is 4 to 6 weeks from order receipt.

Technical information datasheets are available in our website section PRODUCTS/GENERAL PURPOSE SOLENOID VALVES

Quads31-10-2013    Level Switches

We are pleased to inform that M&M has started marketing a new range of level switches suitable for most industrial applications with tanks. They are used to control pumps, valves and alarm systems.

They are available in various materials (steel, engineering plastics, aluminum, polycarbonate) and can reach pressures up to 125 bar and temperatures up to 350 degrees C.

You can get an overview of the full product range in the attached .pdf presentation.

This product can be customized according to your specifications.

Therefore we recommend that you fill up the questionnaires that you will find at the bottom of each technical data sheet.

Datasheets are available in our website section PRODUCTS/CUSTOMIZED SOLUTIONS

 

Quads13-03-2013    HANNOVER MESSE

The world’s most important technology show is a powerful driver of investment in new technology and automation. Global megatrends such as dwindling resources, sustainability, mobility and urbanization are forcing industry to embrace change and invest for the future. In 2013 our line-up of 11 leading trade fairs will focus on recent developments in each of the featured sectors.

We will be very happy to receive you at our stand  C 37,  Hall 22 from April 8th to 12th!

Quads10-03-2013    POSITION MODULE with electrical position feedback

It is a modular accessory equipped to offer an electrical position feedback for reading the valve position of piston actuated valves open and closed.

It can be used for reading 1 valve position only (at choice) or double open/closed position.

The box with electrical position feedback offers the following competitive advantages:

1) it is retro-fitting, keeping the protection class IP65 (unlike current options)

2) It is covering increasing market demand for controlled operations

3) It is cost-effective alternative to current travel switch

The Position Module can be ordered from the M&M Sales office at:

Via Portico 17, 24050, Orio al Serio, Italy

fax: +39 035 531763

e-mail: mm@mminternational.net

Quads25-07-2012    High Pressure Solenoid Valves

M&M  is pleased to introduce you with our range of solenoid valves for high pressure. You can find all our models in the .pdf document below.

 

Please note that we recommend use of high power coils (25VA AC and 22W DC) with high pressure valves to obtain the best performance.

 

The nameplates of high pressure solenoid valves supplied without coil will display the max. OPDs guaranteed with high power AC and DC coils.

 

 

In some cases high pressure solenoid valves may be used with standard coils (18VA AC and 14W DC power), please contact M&M Sales Department for information.

Quads25-07-2012    Double Marking of Pressure Ratings on Solenoid Valves

As part of a continuous and constant improvement of our products, we are pleased to inform you that starting from July 2012 the nameplates of all our solenoid valves will display two pressure ratings: the max. OPD of the valve equipped with AC coils and the max. OPD of the valve equipped with DC coils.

 

Specifically:

 

-         When solenoid valves are ordered and supplied equipped with coils (either DC or AC, both high power and standard power), their nameplate will continue to display only the performance of the valve with the coil actually assembled.

 

 

-         When solenoid valves are ordered and supplied without coils: their nameplate will display both AC and DC performances.

 

 

-         High pressure solenoid valves

 

We have recently tested the performances of all M&M solenoid valves equipped with coils in a variety of powers and voltages, using a new testing equipment that simulates the most severe working conditions.

We have found out that high pressure solenoid valves equipped with high power coils (25VA AC and 22W DC) achieve better performances.

The nameplates of high pressure solenoid valves supplied without coil will display the max. OPDs guaranteed with high power AC and DC coils.

In some cases high pressure solenoid valves may be used with standard coils (18VA AC and 14W DC power),  please contact M&M Sales Department for information.

 

In this case you should order nameplates separately, indicating the part number of the valve and the coil.
Quads17-11-2011    MDA Fair - India

We are  glad to inform you that M&M International srl will participate to MDA India 2011 - International Trade Fair for Motion, Drive & Automation that will be held in Bangalore International Exhibition Center, 10th Mile, Tumkur Road, Madavara Post, Dasanapura Hobli, from December 6th to December 9th, 2011.

We will be very happy to receive you at our stall n. 1EL512! Please check our invitation herewith enclosed!

 

download pdf download pdf
Quads07-09-2011    FLUID POWER & MOTION CONTROL 2011

After being in MDA Russia, M&M International srl will be present in the FLUID POWER & MOTION CONTROL 2011, that will be held in Sao Paulo (Brazil) from October 4th to 6th, 2011.

We will be very glad to receive you in our stand 601A, Rua 600, Pavilion 1. 

Quads05-09-2011    MDA RUSSIA 2011

We are  glad to inform you that M&M International srl will participate to MDA Russia 2011 - International Trade Fair for Motion, Drive & Automation that will be held in Crocus Expo International Exhibition Center, Moscow, from September 27th to 30th, 2011.

We will be very happy to receive you at our stand  B810, Hall7!

Quads11-04-2011    Error in technical datasheet D222DVYI

We are sorry to inform you that there was an error in our D222DVYI tecnical datasheet for inox solenoid valve D222DVYI: the Kv in fact is 160 lt/min and not 216 lt/min as initially stated.

You can find herewith enclosed the correct technical datasheet although we have already modified the other present in the Products > Solenoid Valves section of this website.

We thank you for your attention.

Quads14-03-2010    Product Launch

M&M International is pleased to announce the release of a new solenoid valve in stainless steel.

The valve extends the current solenoid valves range of M&M pilot operated diaphragm valves widening the choice of materials from Brass and nickel plated  to AISI 316L.

Compact valve will bear CE mark and comply to 97/23/EC directive.

Standard NC as well as NO, gas thread version, will be available starting from middle of May/beginning of June 2008.

The Stainless Steel pilot operated Solenoid Valve can be ordered from the M&M Sales offices: for more information, please check the "Contact Us" section of this website.

If you need more information about it, please don't hesitate to contact us.

Quads27-01-2009    Product launch - Control PAV with integrated positioner
M&M International srl has released the new Control Piston Actuated Valve operated by a compact pneumatic integrated positioner working in a closed loop. It accepts the most common set-point signals and all operations have been implemented in a sole, easy and automatic operation by pushing a LED lit button on top of the control box (integrated self-starter). The pre-assembled control PAV arrives to the customer already set and calibrated from the factory.

Benefits
  • The unit is suitable for a wide range of applications where a simple and reliable control valve is required.
  • The control piston actuated valve offers maximum output for a minimal footprint at a very competitive price making it very attractive to OEMs
  • The pre-assembled unit requires minimal installation time and is easy to connect to any PLC of the plant
  • The precisely matched automatic controls provide a variable output ensuring that the media is supplied to the process at the correct flowrate, according to demand fluctuation.
  • All wetted parts are AISI 316L stainless steel, preventing the risk of corrosion, available with hardening treatment, main seal in PEEK, ensuring resistance to most fluids and many duties.
  • The valve can be used with all utilities fluids in a wide range of applications and industries (e.g. in the chemical and pharmaceutical industry, with control heat exchangers, etc.)
For more information regarding this product and/or to order it, please don't hesitate to contact us (please check the "Contact Us" section of this website).
Quads13-01-2009    Stainless steel actuators

M&M International srl is pleased to announce the release of the new compact stainless steel actuators for M&M piston valves. The stainless steel actuator is an alternative to the standard plastic actuators (Polyamide PA6 reinforced fiberglass 30%) already present in our current range of piston valves.

It is suitable  for applications for use in a chemically corrosive environment and is available in two dimensions: Ø 63 and Ø 90 fittable on all M&M PAV range.

Functions available are NC, NO and Double acting. An ATEX version will be also available.

Tha stainless steel actuator improves the compatibility of the valve for all applications where the plants are regularly cleaned with corrosive cleaning agents.

The valves can be used with auxiliary fluids in:

  • Filling systems
  • Chemical and pharmaceutical systems
  • Mixing systems
  • Food processing industry
  • Vacuum equipment
  • Water treatment
  • Pneumatics

Piston valves from DN 32 to DN 50 with stainless steel actuators comply with the 97/23/EC directive, Category I.

The M&M piston actuated valves with stainless steel actuators can be ordered from your usual dealer for M&M piston valves. Lead time for them is 8-10 weeks from order date and will be available with M&M code numbers and branding only.

For more information, please don't hesitate to contact us.

Quads31-03-2008    Air-Tech 2008 - 22-24 April 2008

M&M International srl is pleased to announce that  along with M&M UK will participate to the Air-Tech Exhibition in NEC, Birmingham from April 22nd to April 24th, 2008.

The Air-Tech Exhibition is dedicated to the compressed air and pneumatics industry and is set to become even more of a success this year, focusing on the compressed air industry and prefectly complemented by the welcome return of BFPA supported International Fluid Power Exhibition (IFPEX), which will cover all that is current and cutting-edge in the world of hydraulics and pneumatics.

We will be very glad to receive you at our A68 stand located in Hall 3.

Quads12-07-2007    MIDEST 2007

The 37th MIDEST, the world's leading industrial subcontracting show will take place from 13th to 16th Novembre 2007 in the Paris Nord Villepinte Exhibition Centre.

MIDEST is both a business show and a show case for solutions, a channel and a source of information about the technologies delivering concrete industrial and economic advances.

We will be very happy to receive you at our stand  C97,  Pavilion 5, Section C.

Quads29-05-2007    Expo Show

Un Expo-show per presentare Bergamo e Provincia con le attività, i prodotti e i servizi di tutte le aziende associate e la mission di Confindustria.

Saremo lieti di riceverVi nel Padiglione 9 presso la Fiera di Bergamo dal 7 al 10 giugno 2007 dalle 9:30 alle 20:00.

Quads23-03-2007    Fiera di Hannover Messe
Saremo lieti di riceverVi al nostro stand A12, Halle23 presso la fiera di Hannover Messe dal 16 al 20 aprile 2007.